• Home
  • Training
  • 1"(25mm) – 1-1/2"(40mm) Flexible Hose Installation

1"(25mm) – 1-1/2"(40mm)
Flexible Hose Installation Instructions

< Back to Previous Page
Procedure
Using a male threaded fitting
1. Loosen the nut on the stud fitting
2. Remove it
3. Move the swaged end of the hose onto the exposed stud thread
4. Tighten the nut
Using a pipe to pipe connector
1. Loosen the nut on the connector
2. Remove it
3. Move the swaged end of the hose onto the connector thread
4. Tighten the nut
Using a 90° elbow
1. Loosen the nut on the elbow
2. Remove it
3. Move the swaged end of the hose onto the elbow thread
4. Tighten the nut


Back to Main Training Page
  Email this Page 

Also Available from mdi

Powerex Oil-less
Air Compressors
Finite Filters
powerexsales.com
Coxreels
Hose Reels
Coxreels Hose Reels
coxreelsales.com
Drain-All
Condensate Drains
Coxreels Hose Reels
drainallsales.com
mdi
   
 TransairAluminumPipe.com is owned and operated by mdi, Manufacturers Distributor, Inc. mdi is an Authorized Parker Transair Piping System Distributor. Click Here to view the mdi Line Sheet.