8"(220mm) Installation Instructions

< Back to Previous Page

8"(220mm) pipe to pipe connectors can be quickly connected to Transair pipe.

Position the pipes together, install the seal, and close/ tighten the connector over the seal.

TUBE AND FITTINGS ASSEMBLY AND INSTALLATION INSTRUCTIONS
1 Component Inspection: Prior to assembly, a careful examination of the Tube and Fittings must be performed. All components must be checked for correct style, size, material, seal, and length. Inspect the Fitting and sealing surfaces for burrs, nicks, corrosion, missing seal or other imperfections. Do NOT use any component that displays any signs of nonconformance.
2 Tube and Fitting Assembly: Do not assemble a Parker Fitting with a Tube that is not specifically listed by Parker for that Fitting, unless authorized in writing by the engineering manager or chief engineer of the appropriate Parker division. The Tube must meet the requirements specified to the Fitting. The Parker published instructions must be followed for assembling the Fittings to a Tube.

deburring tool

Tools
Click Here for the Tools Page


Back to Main Training Page
  Email this Page 

Also Available from mdi

Powerex Oil-less
Air Compressors

Finite Filters
powerexsales.com
Coxreels
Hose Reels

Coxreels Hose Reels
coxreelsales.com
Drain-All
Condensate Drains

Coxreels Hose Reels
drainallsales.com
mdi
   
TransairAluminumPipe.com is owned and operated by mdi, Manufacturers Distributor, Inc. mdi is an Authorized Parker Transair Piping System Distributor. Click Here to view the mdi Line Sheet.